90-93 Adaptronic Modular NA6 Plug n Play ECU

90-93 Adaptronic Modular NA6 Plug n Play ECU

  • $855.00

Only 5 left!

Adaptronic has developed an NA6 Mazda Miata Plug N Play ECU. This unit for the price is one of the most powerful units on the market giving you the ability to maximize any performance upgrades to your NA6 Mazda Miata. 

Adaptronic designed these units to promote "best practice" when configuring your engine to ensure the most performance. Adaptronic highly recommends all engines to run with sequential injection and direct fire. The Adaptronic base map does cater to the OEM configuration but we highly recommend for peak performance to add 2 wires to convert the injection to sequential injection. (5 pins are included with your purchase to do this conversion). 

Direct fire is a nice upgrade but it is not required. 

Adaptronic has created a base map for this standalone. The Basemap is based on a stock NA6 Miata and mimics OEM horsepower. In order to maximize the full potential of the ECU tuning will be required. We offer remote tuning services and are well adept on the NA6 Miata platform. Check out the Remote Tuning Services section to see what we have to offer for tuning!


Available Functions:

  • 4 x Injector Outputs (High Impedance Only - cannot be used as addition Aux Outputs) 
  • 4 x Ignition Outputs (Cannot be used as Addition Aux Outputs) 
  • 7 x Aux Outputs - 4 high current PWM, 3 low current PWM (Cant Drive High)
  • 1 x Dedicated Tacho Output
  • 1 x Dedicated Fuel Pump Control (On/Off)
  • 1 x 4 Bar Internal Map Sensor (Can read Baro on Pre-Start) 
  • 2 x TPS Sensors Inputs
  • 1 x External Map Sensor (Can be used in Conjunction for Baro or Emap)
  • 4 x Analog Temp Sensor Inputs w/ Pull-up Select
  • 1 x 0-5V (can be used for an additional Pressure Sensor or Servo Position) 
  • 2 x 0-5V Pressure Sensor Inputs (Oil / Fuel) 
  • 1 x Analogue O2 Input (Max 5V)
  • 3 x CAS Sensor inputs (can be used for Flex-Fuel and Turbo Speed Sensors)
  • 1 x VSS input (Speed Sensor - level & filtering configurable) 
  • 1 x Engine Sync Knock Input (Only 1 is required since the ECU knows when the knock happens thus it identifies the problem cylinder) 
  • 1 x USB (used to interface with the ECU) 
  • 2 x Serial Inputs (to connect serial-based wide bands and EGT Modules)
  • 2 x Serial Outputs (to connect serial-based dashes)
  • 1 x CAN
  • 32MB of Internal Logging
  • Built-in Scope

 Notable features:

  • Fully configurable Fuel/Ignition maps
  • Engine Safety features (Fuel pressure, Oil Pressure, Boost pressure, Lean-Out)
  • Fully characterized OEM injectors Deadtime/Flow-rate (along with many aftermarket Injectors)
  • Flex-Fuel Sensor Integration (Ethanol adjustments for fuel/Ignition maps along with boost by ethanol map)
  • Injection timing/staging adjustments 
  • Boost by gear
  • Launch control
  • Flat-Foot Shifting 
  • One CAN channels 
  • Closed-loop fueling
  • Adaptive Fueling
  • Dual VVT, VTEC, MIVEC Engines
  • Ability to re-position any 0-5V input to be a pressure sensor 
  • Ability to re-position any 0-5V Input to be a Temp sensor (some will require a pull-up)  

 What is all included with the purchase?:

  • ECU
  • USB ECU interface Cable (for tuning & changing settings)
  • Vacuum hose
  • 1GB USB thumb drive